Make a metal swing with your own hands

Do you want to make a metal swing with your own hands? Metal swings are great elements for decorating the outdoor space of the house or garden

This swing has a durable construction and can serve you for many years. If you want to make a metal swing with your own hands, then this article is for you.

Step 1: Choose a material.

First of all, you need to choose a material for a metal swing. Most often, metal pipes or profiles are used. These materials can be purchased at any building materials store.

If you want to make your own metal swing, this article will give you step-by-step instructions on how to do it. Depending on your design and budget, choose the materials for making the swing. You can use steel pipes or profiles, aluminum profiles, wood or other materials.

Tools and materials:

metal pipe (about 2 inches in diameter)

metal rods (about 1 inch in diameter)

tool

drill and drill bits

saw for metal

electric drill

metal staples for connecting pipes and rods

hooks for fastening the swing

chain or rope for hanging the swing

metallic paint

brush

The following tools and materials are also required:

Measuring tape

Marker or pencil

Saw or jigsaw for cutting materials

Polished paper or a sander to remove sharp edges

Welding machine and welding wire

Electric drill and drills for creating holes in the material

Pliers and wrench for tightening screws and nuts

Fabric, slings or ropes are used to cover the swing

Step 2: Make a sketch

Before starting to make a swing, make a simple sketch to determine the shape and dimensions of your future swing. You can use templates available online or create your own design.

Step 3: Measure and mark the dimensions

Use a measuring tape to determine the dimensions of the swing and mark them on the material. Pay attention to the connection points of pipes or profiles, where they will be connected and welded.

Step 4: Make the base of the swing

Using the tools of your choice, make the base of the swing from welded pipes or profiles. Pay attention to the fact that the connection points are strong and stable.

Step 5: Add details

Add details to the swing that match your design. These can be armrests, a back, support platforms for legs or other details.

Step 6: Finish and Finish

After the swing is assembled, check all connections for strength. Remove sharp edges and secure with fabric covering, slings or ropes. Use sandpaper or a sander to remove sharp edges and unevenness on the surface of the swing.