How to quickly glue wallpaper
Wallpaper is one of the most popular materials for decorating walls in the house. They are available in different designs, colors and textures, so they can be used to create a variety of interiors. However, gluing can be a challenge for those who do not have enough experience in repair work. In this article, we will look at some useful tips that will help you glue quickly and easily.
Preparation of walls
First of all, it is necessary to prepare the walls for gluing wallpaper. The walls must be clean, dry and even. If there are remnants of old wallpaper on the walls, they must be removed and the surface thoroughly cleaned. If the wall is uneven, you can use putty to smooth the surface. Also, before gluing wallpaper, it is recommended to prepare the necessary tools, such as knives for cutting, tape measure, brushes and sponges.
Choice of glue
Choosing the right adhesive for wallpaper is a very important stage. The glue should match the type of wallpaper you plan to use. For example, you can use silicone glue for heavy and rough wallpaper, and starch-based glue for thin and light ones. It is important to follow the adhesive manufacturer’s instructions to ensure optimal results.
Measuring and cutting wallpaper
Before applying glue to the wallpaper, you need to measure the distance from the previous strip of wallpaper to the corner of the wall. This will help to get rid of the risk that the last strip of wallpaper will be too narrow or wide. Also, it is important to consider the height of the ceiling and the size of the room when measuring wallpaper.
When is measured, it can be cut to the required dimensions. It is important to follow the manufacturer’s instructions for cutting wallpaper. For this, you can use a special knife for cutting, or a sharp knife.
Applying glue
Applying glue to the wallpaper can be done with a brush or roller. It is important to evenly apply the glue to the entire surface, in particular to the edges and corners. Then should be folded into an accordion, smearing glue on each strip. In order for the glue to be absorbed into the wallpaper, it should be allowed to stand for 5–10 minutes.
Attaching to the wall
When the wallpaper is covered with glue, and it is ready to be attached to the wall. You should smooth, starting from the center and moving to the edges, to avoid the formation of air bubbles under the wallpaper. Also, it is important to carefully remove any excess glue with a sponge or tissue.
Placement of the next lane
After the first strip of wallpaper is attached to the wall, you can move on to the next strip. It is necessary to repeat the process of applying glue to the wallpaper and attaching it to the wall, observing the measurements and coincidences in the design samples. It is necessary to carefully align the strips of wallpaper to avoid the formation of gaps or distortions.
Cropping the edges
After all strips of wallpaper are attached to the wall, it is necessary to cut off the excess edges with scissors or a knife for cutting. It is important not to touch the wall when cutting wallpaper.
End of work
Once the wallpaper has been applied to the entire wall, alignment and matches should be rechecked in the design samples. If there are some flaws, they can be corrected by using needles or other tool to correct small mistakes.
Also, you should remove excess glue on the wallpaper and the wall using sponges or napkins. Then you should wait until the glue is completely dry, which usually takes 24 to 48 hours.
All these steps will help you quickly and effectively glue wallpaper in any room. It is worth remembering that in order to achieve the best result, it is necessary to spend some time and concentrate on the work. After the work is completed, you will enjoy your new room design.
